CHEN, HSING-SUNG.
Name CHEN, HSING-SUNG.
Tel +886-5-6315473
Office Tel No. 5177
Email
Expertise Composite Materials, Fuel Cells, Materials Fatigue and Fracture, Eco-friendly Materials

 

Education

M.S., Department of Power Mechanical Engineering, National Tsing Hua University

Ph.D., Graduate School of Engineering Science and Technology, National Yunlin University of Science and Technology

Areas of Expertise and Research

Composite materials, fuel cells, material fatigue and failure, environmentally friendly materials

Professional Experience

Associate Professor, National Formosa University

 

Funding or Commissioning Agency

Project Duration

Project Title (Project Number)

National Science Council

    2008/8/1~2009/10/31

Study on the Damage Characteristics and Detection Methods of Accelerated Fatigue in Reduced Carbon Fiber Composites

National Science Council

2004/8/1~2005/7/31

Study on Accelerated Fatigue Characteristics of Composite Materials (3/3)

National Science Council

2003/8/1~2004/7/31

Study on Accelerated Fatigue Characteristics of Composite Materials (2/3)

National Science Council

2002/8/1~2003/7/31

Study on Accelerated Fatigue Characteristics of Composite Materials (1/3)

National Science Council

2001/8/1~2002/7/31

Investigation of the Mechanical Properties of Short Fiber Reinforced Composite Materials

 

1

S.S. Chen, P.T. Tseng, and S. F. Hwang,” Failure Analysis of Bolts on an End Flange of a Steam Pipe,” Engineering Failure Analysis, accepted November 1, 2004.

2

Chen, H.S., Hwang, S. F., “Failure Analysis of Bolts on an End Flange of a Steam Pipe,” Engineering Failure Analysis, Volume 13, Issue 4 , June 2006

3

Chen, H.S., Hwang, S. F., “Accelerated Fatigue Properties of Unidirectional Carbon /Epoxy Composite Materials,” Polymer Composites, Volume 27, Issue 2 , April 2006

4

Chen, H.S., Hwang, S. F., “A Fatigue Damage Model for Composite Materials,”Polymer Composites, August 26, 2007

5

M. C. Chiou, C. H. Chiu, H. S. Chen, Formulation for predicting deposition velocity of particles in turbulence, International Journal of Thermal Sciences, Volume 49, Issue 2, February 2010

6

C. H. Chiu, H. S. Chen, M. C. Chiou, Modified sublayer approach model for analysis of turbulent particle transports, Applied Mathematical Modelling, Volume 34, Issue 1, January 2010

1

S.S. Chen and S. F. Hwang, ”Accelerated Fatigue Properties of Single-Fiber Composite,”11th International Conference on Fracture, March 21~25, Turin,Italy.

2

蕭進嘉,陳興松,黃順發,“熱固型複合材料振動測試及以最佳化方法反算材料之機械常數”,第十九屆機械工程學會論文集,2001年12月,虎尾。

3

Chen, H.S., Tseng, P. T., Hwang, S. F., “ACCELERATED FATIGUE PROPERTIES OF SINGLE-FIBER COMPOSITES,” 11th International Conference on Fracture, Italy, March, 2005 

4

H. S. Chen, W. C. Chen, S. F. Hwang, “ A Damage Examination Method by C-Scan on CFRP Laminate ,” 12th International Conference on Fracture, Canada, July 12-17, 2009

5

H. S. Chen, W. C. Chen, S. F. Hwang, “A Study on the Fatigue Damage of CFRP with C-Scan Examination Method,” 2009 International Workshop on Processing and Properties of Reinforced Polymer Composites, June 15-16, 2009, Taichung, Taiwan

6

許逸豪,邱明志,陳興松,謝琬婷,純膨脹石墨雙極板應用於PEMFC與膨脹石墨複合板之研究,中國機械工程學會第二十六屆全國學術研討會論文集,中華民國98年11月20~21日

Publish Date Patent Title Patent Number Patent Country Authors
2024/10/20 具連通孔洞之陶瓷結構及其製程 I859723 國內 陳興松,林兆野,陳宇弘,張哲維,白珮妡
2022/03/31 泳池水道繩結構 I760088 國內 陳興松,吳念穎,黃逸鋐,李俊毅,李大衞,劉正達,柯鈞瀚
2020/06/30 路面瀝青貼片之製造方法 I697603 國內 鄭芳松、陳興松、謝傑任、蘇暉凱
Honor Category Year Award Name Awarding Unit
第二名 2022 2022 康寧創星家 優等獎 台灣康寧顯示玻璃股份有限公司
2023 112年全國大專校院諮商輔導主任(組長)會議任滿3年資深卸任輔導中心主任(組長)講座 教育部
Year Competition Name Work Name Student Name Instructor Name Award Place
2022 2022 康寧創星家 - 創新應用競賽 廢棄鋁渣的春天 白珮妡 張哲維 陳宇弘 第一位 第二名
2020 少年頭家全國創業實務競賽 顏厝寮文化藝術聚落-雲林水林鄉地方創生 林怡岑、李湘晴、洪聖傑、許佑齊、甘繹賢 第二位 第二名
Service Name Service Type Service Unit Participation Status Area Service Start Date Service End Date
產學合作夥伴聯絡人 其他 國立虎尾科技大學 2012-08-31 2012-09-01
材料系教師徵聘委員 其他 國立虎尾科技大學 2012-02-29 2012-03-01
材料系教師徵聘委員 其他 國立虎尾科技大學 2012-08-31 2012-09-01
產學合作夥伴聯絡人 其他 國立虎尾科技大學 2012-02-29 2012-03-01
工學院院務委員 其他 國立虎尾科技大學 2012-08-31 2012-09-01
其他 國立虎尾科技大學 2011-02-28 2011-03-01
其他 虎尾科技大學材料系 2011-02-28 2011-03-01
其他 暢同技術工程股份有限公司 2010-02-28 2010-03-01
其他 國立虎尾科技大學 2010-08-31 2010-09-01
其他 國立虎尾科技大學材料系 2010-08-31 2010-09-01
其他 國立虎尾科技大學 2009-08-31 2009-09-01
其他 國立虎尾科技大學 2009-02-28 2009-03-01
其他 虎尾科技大學材料系 2009-02-28 2009-03-01
其他 虎尾科技大學 2009-02-28 2009-03-01
其他 國立虎尾科技大學 2008-08-31 2008-09-01
其他 虎科大材料系 2005-02-28 2005-03-01
擔任國外專業期刊編審及評審 Polymer Composites
Year Paper Title
2024 TU, YUEH-HUNG, Effect of different particle sizes of aluminum slag on water permeability of waste aluminum slag bricks, 2024
2024 LEE, TING-AN, Study on heat treatment and mechanical properties optimization of forging times and extrusion ratio of AA 6082 aluminum alloy, 2024
2024 KAO, PO-KAI, Optimization of Heat Treatment Parameters and Mechanical Property Evaluation of Cast and Skin Peeled Extruded AA 6082 Aluminum Alloy, 2024
2024 LIAO, YI-CHENG, A Taguchi Method Approach to Optimize the Secondary Heat Treatment Parameters of 7075 Aluminum Alloy, 2024
2023 Simulation Analysis of Cooling Efficiency of Watery Porous Ceramic Columns, 2023
2023 The mechanism of collecting dust by centrifugal force, 2023
2023 Research on the application of aluminum slag porous ceramics in improving water quality, 2023
2023 Study on the Porosity and Permeability of Permeable Bricks Made from Waste Aluminum Dross, 2023
2021 Study of Recycling and Reuse of Aluminum Slag, 2021
2021 Research and evaluation of the recycling and reuse of industrial aluminum dross and industrial waste acid, 2021
2019 Discuss and improvement the question of ozone concentration is unstable in the wafer cleaning process, 2019
2019 Feasibility Study on the Pretreatment of Rice straw before the Waste Aluminum Dross Accelerates to dissociate it, 2019
2018 Optimization of Recycling Chemical Waste Liquid Parameters by Reactive Distillation, 2018
2018 Study on the Tribology of Graphene Modified PAO, 2018
2018 A Study on the Material Properties of Heat Aluminum Alloy after Friction Stir Welding, 2018
Wan-Ting Hsieh, Study on the Manufacture Process and Property of Graphite/Epoxy Composite Conductive Plates
Wei-Chi Chen, Studies of non-destructive inspection for fatigue damaged rate of composite materials
Jhu-Jyun Dai, The Option of Ingredients and Properties Analysis of the Epoxy- Resin-Based Thermal Insulation Coating
Cong-Xiang Shen, Study of the Manufacture Processes and Properties of Three-Dimension Carbon Fiber Structure Reinforced Graphite Base Bipolar Plate of Fuel Cell
Ting-Wei Jhan, Study of the Properties of Graphite Base Bipolar Plate of Fuel Cell with Different Carbon Fiber Structure and the Evaluation of Different Release agents During the Manufacture Process of Bipolar Plate
Wei-Chih Huang, The Study of Application of Response Surface Method on Spheroidization Treatment of SWRCH22A Steel Wire Rod
Hong-Chen Zhou, Preparation and characterization of superparamagnetic iron-oxide/polyimide nanocomposite films with a high solid content
You-Zong Syu, The Option of ingredients and Property Analysis of the Epoxy Resin Employed in Cured-In-Place Pipe Under the Hydrothermal Environment
Wei-Jhih Lai, Molecular Dynamics Simulation of Co Cluster Deposition on Si Substrate
Pei-Hsin Chiang, Study on the Manufacture Processes and Properties of the Carbon Fiber/Graphite Base Bipolar Plate of Fuel Cell
Chin-Hui Chou, Study on the Manufacture Processes and Properties of Fuel Cell Bipolar-Plate Made of Aluminum/Carbon Fiber Corrugated Sheet
Chi-sheng Chan, Study on the Injection Molding Process of Electric Graphite/ Carbon-Fiber Filled Composite Plate
QIU, MING-HONG, Influence and Analysis of Asphalt slice Formulated by Double Roller Hot Press
Chiuan-Hung Weng, A Study of the Fatigue Damage Porperties of Carbon Fiber / Epoxy Composite
Cheng-Chung Ou, Study on the Manufacture Process and Property of Expandable Graphite/Powder Epoxy/Carbon Fiber Bipolar Plate for PEMFC
Cheng-Pei Yang, A Study of Tensile Behavior on Bimetal Structures Using Molecular Dynamics Simulation
Chiuan-Guo Jen, A Molecular Dynamics Simulation of Stress and Strain Behaviors of Cu/Al Bimetal Micro-Structure under Tensile Force
Han-teng Tang, Study on the Manufacture Process and Property of Expandable Graphite/Powder Epoxy Bipolar Plate for PEMFC
Yi-Cheng Zheng, Molecular Dynamic Simulation of Al Clusters Deposition on Cu Substrate
Bau-Ming Yu, Investigation on the Relationship between the Fatigue Stiffness Degradation and Damage of Carbon/Epoxy Laminate
Course Title Class Reference Link
校外實習-學期(三) 四材料四甲 https://tqas.nfu.edu.tw/course_schedule/detail/11421574
校外實習-學期(二) 四材料四甲 https://tqas.nfu.edu.tw/course_schedule/detail/11421573
校外實習-學期(一) 四材料四甲 https://tqas.nfu.edu.tw/course_schedule/detail/11421572
實務專題(一) 四材料三甲 https://tqas.nfu.edu.tw/course_schedule/detail/11421549
材料力學 四材料二乙 https://tqas.nfu.edu.tw/course_schedule/detail/11421540
材料力學 四材料二甲 https://tqas.nfu.edu.tw/course_schedule/detail/11421528
燃料電池 碩材綠一甲 https://tqas.nfu.edu.tw/course_schedule/detail/11420223
Category Year Title Patent Granted Patent Title Patent Number
技術移轉 2019 O3微氣泡快速禽肉解凍清洗機洗滌水通道阻塞之解決技術 false
技術移轉 2018 水耕蔬菜育苗播種機吸種針之壽命提高技術 false
Certificate Issued By
實驗室品質管理 中華民國實驗室認證委員會
測試實驗室負責人 中華民國實驗室認證委員會
車床工乙級技術士證照 行政院勞工委員會